Mais informações

SILVA, Augusto Ottoni Bueno da; JÚNIOR, Armando Lopes Moreno. Reforço à flexão em vigas de concreto de alta resistência através da colagem externa de manta de PRFC. In: CONGRESSO INTERNACIONAL SOBRE O COMPORTAMENTO DE ESTRUTURAS DANIFICADAS, 2., 2000, Rio de Janeiro. Anais... Rio de Janeiro, 2000.
Clique no nome do(s) autor(es) para ver o currículo Lattes:

Dados do autor na base InfoHab:
Número de Trabalhos: 1 (Nenhum com arquivo PDF disponível)
Citações: Nenhuma citação encontrada
Índice h: Indice h não calculado  
Co-autores: Nenhum co-autor encontrado

Dados do autor na base InfoHab:
Número de Trabalhos: 1 (Nenhum com arquivo PDF disponível)
Citações: Nenhuma citação encontrada
Índice h: Indice h não calculado  
Co-autores: Nenhum co-autor encontrado

Resumo

Os polímeros reforçados com fibras (PRF) foram utilizados pela primeira vez para armar estruturas de concreto na metade da década dos 50. Hoje em dia estes produtos já são utilizados para a fabricação de barras, cabos, telas, mantas e laminados. Estes materiais podem alcançar objetivos estruturais de forma semelhante ou superior aos produtos metálicos comumente utilizados, como as barras de aço, tendões protendidos e chapas de aço coladas (ACI 440R, 1996). Em 1986, a primeira ponte no mundo utilizando armação de barras compósitas foi construída na Alemanha. Desde então têm sido concebidas estruturas deste tipo na Europa, na América do Norte e Japão.

Abstract

The objective of this paper is to offer a contribution in the study of the behavior of high performance concrete beams with externally bonded carbon-fiber-reinforced plastic (CFRP) sheets. Four beams, with concrete strength around 90 MPa, and with identics geometry and reinforcing bars were tested under bending until failure. Three of the beams were strengthened, in flexure, with the use of CFRP sheets bonded to the tension face of the members. In one of the strengthened beams was proposed anchorages at the plate ends. The results showed the efficiency of the strengthening method, with an increment in the flexure resistance, in comparison with the beam without external reinforcing, of 56%. It was also seen in the high performance concrete beams analised that the premature debonding of the sheet can be avoided through the use of the anchorage system proposed.
-